Hardware and Accessories

A range of precision stainless steel screws, hardware and accessories available to complement assemblies.

Hardware and Accessories

A range of precision stainless steel screws, hardware and accessories available to complement assemblies.

Machine Screws and Hardware

Reliance Precision machine screws are available with thread sizes from M1.6 to M6. Included in the range are special hexagon head socket screws manufactured with ventilation holes for high vacuum assemblies, cross drilled heads for wire locking, turned down threads for captive requirements and precision shoulders as an alternative to separate dowels.

Stainless steel clamp cleats are ideal for positioning and holding small gearboxes and electro-mechanical components.

Precision stainless steel dowel pins with an outer diameter of +0.0025/-0.0025 mm to provide accurate location.

Stainless steel internal circlips to suit shaft diameters of 3 to 12 mm and external circlips to suit bores of 12 to 30 mm. We can also provide stainless steels disc springs available to suite screw sizes M4 to M12

Download the Screws and hardware section or contact us for more information.

Link to download hardware section of the catalogue

Screws and Hardware

Wire locking screws

Shoulder screws

Nylon tip grub screws

Ventilation screws

Bearings and Spacers

To complement and support the wider range of products available from Reliance we also offer a selected range of bearings, spacers and pre-load washers.

Included in the range of bearings are P4 bearings, bronze bearings and moulded bearings all available plain or flanged.

Link to download bearings section of the catalogue

Bearings and Spacers

P4 bearings

Bronze bearings

Moulded bearings

Gear Clamps and Accessories

Reliance gear clamps, shafts and accessories are a group of precision manufactured components complementing the other components in the Reliance range.

  • Precision ground 303 stainless steel shafting from 3 mm to 12 mm diameter. Ground stock shafts can be cut to or machined to a specified length. End modifications similar to those provided on leadscrews are available. Lengths of up to 1,000 mm available on the 10 mm to 12 mm diameter shafts, 600 mm for the smaller diameter.
  • 303 stainless steel shaft retaining collars with bore from Ø2.0 to Ø12.
  • Gear and dial hubs with pin or clamp type fixing. Set screw supplied with the pin type version.
  • Precision gear clamps specifically designed to provide reliable accurate clamping when used with Reliance’s cut gear range. Standard stainless steel variants and low inertia aluminium alloy are both available.
  • Stainless steel shaft retaining collars with bores diameters from 2 mm to 12 mm. Ideal for hubless gears.
  • All products in the gear shaft and accessories section are available in imperial sizes, please contact our sales team for more information.
Link to download gear clamps and accessories section of the catalogue

Gear Clamps & Accessories

Gear clamps

Shaft retaining collars

Ground stock shafts

Contact us for more information